Disposal Of Old Electrical Appliances - Aspes ACT1601X Manual De Instrucciones

Dismantle LED linght module
Remove the grease filter and carefully remove the 2 screws from the front plate (a cross

headed screwdriver will be needed to remove the screws).
Disconnect the terminal of LED light.

Press LED light on the back of the front plate, take the LED light out.

Replace the lamp(commercially available LED lamp (max.1.5w).

Square / Diameter
: 33.2mm x 120mm
Reinstall LED light module
Press LED light on the front of front plate, install the LED light on the front plate.

Connect the terminal of LED light and light leads.

Carefully fasten the 2 screws on the front plate ,reinstall the grease filter.


DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old
household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old
appliances must be collected separately in order to optimize the recovery and recycling of the materials they
contain, and reduce the impact on human health and the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your obligation, that when you dispose of
the appliance, it must be separately collected.
Consumers should contact their local authority or retailer for information concerning the correct disposal of
their old appliance.
Max Power Voltage
1.5W DC 12 V
Picture
EN-9
Lamp Cap ILCOS D code
DSS-1.5-S-33.2
——
/120