Troubleshooting - Angelcare AC115 El Manual Del Proprietario

Ocultar thumbs Ver también para AC115:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TROUBLESHOOTING

TAKING CARE OF YOUR RECHARGEABLE BATTERIES
• Ensure that you fully charge your batteries for 10 hours before their first use.
• To maintain maximum battery life it is recommended that you fully discharge your
batteries periodically. Battery performance can be diminished by leaving the batteries
constantly charging. If your parent unit is not in use, please turn it off.
• Inadequate battery power can impair the performance of your monitor. If you are not
happy with the performance of your Parent Unit Monitor please replace the rechargeable
batteries (2 x NiMH Rechargeable Batteries).
• It is advisable to change the batteries every 6 months.
FALSE ALARMS
• Turn OFF the Nursery Unit.
• Make sure there is no bedding between the mattress and the Sensor Pad.
• If the crib has a spring or slat base, place a hardboard between the crib base and the
Sensor Pad measuring at least 13'' x 13'' (33 x 33 cm) thick.
• Make sure Sensor Pad is positioned as described under the setup requirements.
Sensitivity may need to be adjusted, refer to Step 5.4.
ALARM WILL NOT SOUND
• Avoid contact with the crib when the monitor is ON.
• Place crib near a solid supporting wall to avoid Sensor Pad from detecting movement
from outside the crib.
• Turn OFF crib mobile, fans, loud music or anything else that may cause vibration.
• You may need to decrease the sensitivity, refer to Step 5.4.
NURSERY UNIT POWER ON INDICATOR (GREEN LIGHT) DOES NOT LIGHT UP
• Check connections or change to another electrical outlet.
• Press the Nursery Unit ON/OFF button for 2 seconds to turn the Nursery Unit ON.
22
Power On/Off Light Indicator
Low Battery Light Indicator
Flashing green
Flashing yellow
Nursery Unit batteries are low
Steady green
Sensor Pad Light Indicator
Temperature Indicator
No movement is detected or
Flashing red
Sensor Pad is disconnected
Flashing white
Steady Red
Room temperature is too hot
Steady Blue
Room temperature is too cold
Steady White
Room temperature is good
Nursery unit is using the
back-up batteries
Monitor is activated
Monitor is paused

Publicidad

Tabla de contenido
loading

Tabla de contenido