Changing The Language; Important - ChickenGuard EXTREME Manual De Instrucciones

CHANGING THE LANGUAGE

1. Press MENU to enter the programme menu.
2. Press UP or DOWN until you find: LANGUAGE.
3. Press UP or DOWN to find your language.
4. Press MENU to save.
CHANGING THE DOOR CALIBRATION
1. Press MENU to enter the programme menu.
2. Press UP or DOWN until you find: CALIBRATE DOOR.
3. Press MENU to enter the calibrate door mode.
4. Press and hold UP until the door is fully open.
5. Press and hold DOWN until the door is fully closed.
6. Release the button and the door will automatically open.
7. The display will now read: CALIBRATION COMPLETE.
Note: To adjust the open and close positions, you can repeat this
process as many times as you wish.

IMPORTANT

If there is no movement of the door when pressing UP or
DOWN, check that the motor lead has been connected.
If the door moves in the opposite direction to the button, then
check the orientation of the motor lead as per picture below.
USING ELECTRIC MAINS POWER
If you want to use electric mains power, rather than batteries then
follow these instructions.
Note: Requires a USB-USB cable and USB charger (not included).
1. Remove the front panel.
2. Disconnect the battery connector from the battery holder.
3. Connect the battery connector to the front panel like so:
4. Re-attach the front panel.
8
chickenguard.com