Installation On Ceiling Fan Cf901, Cf4502 & Cf4802 - Luminance Brands AL200 Manual Del Usuario

3. Installation for Ceiling Fan CF901, CF4502 & CF4802
3.1
Position the LED Accent Light Fixture so that the
Downrod passes through the opening of the LED
Accent Light Fixture .
Align the LED Accent Light Fixture Female 2-Pin
Connector with the Motor Housing Assembly Male
2-Pin Connector (Figure 1) .
3.2
Align the Mounting Holes of the LED Accent Light
Fixture and the Motor Housing Assembly (Figure 2) .
NOTE: Be sure the LED Accent Light Fixture
Connector is located close to the Motor Housing
Assembly Connector for ease of installation.
Install the LED Accent Light Fixture to the Motor
Housing Assembly using three #8-32 Pan Head Screws
(supplied) (Figure 2) .
WARNING
!
To avoid possible fire or electric shock, be careful
not to pinch wires under the LED Accent Light Fixture
during assembly.
3.3
Securely engage the LED Accent Light Fixture Female
2-Pin Connector to the Motor Housing Assembly Male
2-Pin Connector (Figure 3) .
For storage of excess Connector Wire, tuck the
Connector Wire along inside edge of the LED Accent
Light Fixture (Figure 3) .
LED ACCENT
LIGHT FIXTURE
LIGHT FIXTURE
FEMALE 2-PIN
CONNECTOR
MOTOR
HOUSING
ASSEMBLY
MALE 2-PIN
CONNECTOR
MOTOR
HOUSING
ASSEMBLY
Figure 1
#8-32 PAN HEAD
SCREWS (3)
LIGHT FIXTURE
MOUNTING
HOLES (3)
MOTOR
HOUSING
ASSEMBLY
HOLES (3)
Figure 2
CONNECTOR
WIRE STORAGE
Figure 3
4
MOTOR HOUSING ASSEMBLY
MALE 2-PIN CONNECTOR
LIGHT FIXTURE
FEMALE 2-PIN
CONNECTOR
U.L. Model No.: AL200