LF Harbor Breeze MAZON MZ44BNK3LR Manual Del Usario página 14

OPERATING INSTRUCTIONS
2. Restore electrical power. Within 30 seconds of
restoring electrical power, press and hold the
"0" button on the remote control transmitter for
5 seconds or until light on the fan blinks twice.
Use the remote control transmitter to test the light
and fan functions to confirm the learning process is
complete.
NOTE: Remove protective covering from front of
remote control transmitter and discard.
IMPORTANT: To prevent damage to remote
control transmitter, remove the battery if not used
for long periods. Store the remote control
transmitter away from excess heat or humidity.
Operation buttons on the panel of the remote
3.
control transmitter:
3 button
2 button
1 button
0 button
button
Tap button quickly to turn lights off or on. Hold
button down to increase or decrease lights. If
you press button in excess of 0.7 seconds, it
becomes a dimmer. The lights vary cyclically in
8 seconds. The light button has an auto resume
function, which keeps the light at the same
brightness as the last time it was turned off.
4. Use the fan reverse switch on the fitter plate (D) to
optimize the fan for seasonal performance. A ceiling
fan will allow you to raise your thermostat setting in
summer and lower your thermostat setting in winter
without feeling a difference in your comfort.
CAUTION: Turn fan off at wall switch and let
blades (G) come to a complete stop before
manually activating the reverse switch.
for fan HIGH speed
for fan MEDIUM speed
for fan LOW speed
to turn fan OFF
to turn light ON or OFF
2
Remote Control Transmitter
3
Remote Control Transmitter
4
Reverse
Switch
14
D