Front Panel; Rear Panel - Velleman HQ POWER VDP250MHS16 Manual Del Usuario

Colour / static gobo-wheel
Gently bend out the gobo holder to release it from the fixative holes and eject it from the pressing snap. Press the
ends of the fixation-ring together with an appropriate tool and remove it. Remove the gobo and insert the new gobo.
Press the ends of the fixation-ring together and insert it in the front of the gobo. Put the gobo holder back under the
pressing snap and push it to the 3 fixative notches.
1. pressing snap
2. gobo holder
3. gobo
d) Description of the device
1. moving head
2. yoke
3. carrying handle
4. base

FRONT PANEL

5. power switch
6. DMX output
7. DMX input
8. power cord
9. fuse holder

REAR PANEL

10. MODE button
11. ENTER button
12. UP button
13. DOWN button
14. display
VDP250MHS16 3 VELLEMAN