DESCRIPTION OF TRANSMITTER PARTS
Transmitter Indicator Light (LED Window)
The transmitter indicator light (LED) is located
near the Rheostat Intensity Dial. The LED light
will come on when a button is pressed.
The color of the light indicates the status of
battery life. Green Indicates the battery is fully
charged. It turns to amber when the battery is at
medium charge. It is acceptable to charge your
unit even at medium charge without any damage
incurred to your unit. When the transmitter
indicator emits a blinking red light, the battery
needs to be recharged.
(Green = full charge, Amber = medium charge,
Red = needs charge)
40
DESCRIPTION OF TRANSMITTER PARTS
Transmitter Battery Charging Receptacle &
Rubber Plug
Located on the backside of the transmitter, the
charging receptacle is covered by a rubber plug.
Insert one end of the battery charging cable into
the receptacle to charge the battery. (See Battery
Charging Procedure on page 54.)
After charging is completed, close the receptacle
with its rubber plug to make sure dirt or water
does not get inside.
41