Descargar Imprimir esta página

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

CHARGING THE BATTERIES
The indicator light on the transmitter or
receiver will not ACTIVATE.
The transmitter or receiver does not stay on
when one of the stimulation or pager buttons
is pushed.
Battery Charging Procedure
1. Attach the charging cables to both the
transmitter and receiver(s), as shown on
page 53.
2. Plug the charger into a 230-volt wall outlet or,
if using the accessory field charger, plug into a
cigarette lighter. When properly plugged in, all
indicator lights should glow red.
The receiver automatically turns off when you
insert the charging cable into the battery-
charging receptacle on the receiver.
3. After charging, cover the battery charging
receptacles with the rubber plugs on the
transmitter and receiver.
4. The battery is fully charged with a 10-hour
charge. The lights will stay red during the
charging process. They DO NOT turn green
when fully charged. Charging the batteries for
more than 10 hours at one time will not extend
the battery life.
54

RECEPTION

The
600m. Depending on the way you use your
transmitter, the range may vary.
Hold the transmitter away from your body and
avoid touching the antenna, to get the greatest
range.
For maximum signal strength, keep your unit
properly charged.
Maximum Range
Typical Range
Minimum Range
RECEPTION
collar has a range of
55

Publicidad

loading

Este manual también es adecuado para:

600m602m