Holife HM322A Manual De Usuario página 7

Press
Clean & Replace the Filter Screen
Clean & Replace Foam
1 Press
3
Hepa Filter
Sponge Filter
EN 12
Fig 1
Buckle-Fix
Fig 2
2
4
Clean the transparent dust container if needed.
Follow the instructions in Fig. 1.
Press the motor block release button to separate the dust container
from the motor block
Open the dust container lock button and take out the dust container
Pour garbage into the trash can.
Clean the dust container only with a damp cloth
Ensure that the clear dust container and seal are completely dry
before making replacements.
Reinstall the transparent dust container, as shown in Fig. 2.
Insert the pillar into the dust container slot.
Close the dust container lock until you hear the "click" sound.
Clean & Replace the Filter Screen
Clean & Replace Foam
Clean the filter unit at least once a month, or clean the filter every time
when the dust is heavy.
Follow the instructions to check the cleaning filter unit to ensure
performance.
Separate the main unit and the dust container according to the
instructions in Fig.1.
Rotate the strut to the open state as instructed to remove the filter
and sponge
Before cleaning, gently tap the filter to remove excessive dust and
debris.
Only use cold water to clean the filter unit: Do not use detergent or
use a dishwasher or washing machine for cleaning.
First, clean the Hepa filter, hold the filter device under the cold-water
tap, and let the water rinse folded filter paper;
Continue to rinse until the water is clean.
Then clean the foam of the filter device, take out the foam filter
separately, and continue to rinse the inner and outer sides of the
13 EN