Setting "Teletext" (For Tv Only); Setting "Input Sensing" (For Pc 1/Pc 2 Only) - Sony MFM-HT75W Manual Del Usuario

6 Press the M/m buttons to select "Sub Position" and
press the OK button.
The "Sub Position" menu appears on the screen.
Option
PIP On
PIP Setting :
Sub :
Sub Size :
Sub Position
Audio Select :
Select
7 Press the M/m buttons to select the desired position
and press the OK button.
You can choose one of 4 positions for the sub picture.
To select the audio input source (PIP function: On)
1 Press the MENU button.
The main menu appears on the screen.
2 Press the M/m buttons to select
press the OK button.
The "Option" menu appears on the screen.
3 Press the M/m buttons to select "PIP" and press the
OK button.
4 Press the M/m buttons to select "PIP Setting" and
press the OK button.
The "PIP Setting" menu appears on the screen.
5 Press the M/m buttons to select "PIP On" and press
the OK button.
6 Press the M/m buttons to select "Audio Select" and
press the OK button.
The "Audio Select" menu appears on the screen.
Option
PIP On
PIP Setting :
Sub :
Sub Size :
Sub Position
Audio Select :
Select
7 Press the M/m buttons to select the desired source
and press the OK button.
• Main: The sound from the input source selected for the
main picture will be used.
• Sub: The sound from the input source selected in the
"Sub" menu will be used.
Notes
• Volume should be adjusted on the connected computer or other
equipment.
• If you set "PIP Setting" to "PIP On," "Audio Select" is set to "Sub" as
the default.
Tip
If you select "Sub," is displayed in the upper left corner of the screen.
28
DVI-D: PC 1
PIP On
TV
Large
1280 ⋅ 1024/60 Hz
Set Exit
OK MENU
(Option) and
DVI-D: PC 1
PIP On
TV
Large
Main
Sub
1280 ⋅ 1024/60 Hz
Set Exit
OK MENU
x Setting "Teletext" (for TV only)
You can view the Teletext page, if the broadcaster offers this
service. For details how to view Teletext, see "Using the Teletext
service (for TV only)" on page 33.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the M/m buttons to select
press the OK button.
The "Option" menu appears on the screen.
3 Press the M/m buttons to select "Teletext" and
press the OK button.
The "Teletext" menu appears on the screen.
Option
PIP :
Teletext :
Input Sensing :
Language :
Menu Position
Menu Lock :
Demo Mode :
All Reset
Select
4 Press the M/m buttons to select either "Off" or "On"
and press the OK button.
• Off: The Teletext mode is turned off.
• On: The Teletext mode is turned on.
x Setting "Input Sensing" (for PC 1/PC 2 only)
You can set the display to automatically detect an available input
signal, and switches the input.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the M/m buttons to select
press the OK button.
The "Option" menu appears on the screen.
3 Press the M/m buttons to select "Input Sensing"
and press the OK button.
The "Input Sensing" menu appears on the screen.
Option
PIP :
Teletext :
Input Sensing :
Language :
Menu Position
Menu Lock :
Demo Mode :
All Reset
Select
4 Press the M/m buttons to select either "On" or "Off"
and press the OK button.
• On: When a signal from the selected input source drops
off or you have selected the input that receives no
signal, the display try to detect a signal from the
other computer input and display it, if available.
• Off:
The display does not switch the input
automatically. Press the
buttons to change the input.
(Option) and
: TV
On
Off
English
Off
Off
Set OK Exit MENU
(Option) and
DVI-D: PC 1
On
Off
Off
Off
1280 ⋅ 1024/60 Hz
Set Exit
OK MENU
button or input select