Technical Features; Controlling The Volume; Power Saving Function - Sony MFM-HT75W Manual Del Usuario

Technical Features

Controlling the volume

Using the display's speakers or headphones, you can listen to
sound from your computer or other equipment connected to the
display's audio input jacks.
You can control the volume by using the "Volume" adjustment
bar.
1 Press the VOL+/– buttons when there is no menu
displayed on the screen.
,
2 Press the VOL+/– buttons to set the desired volume
level.
The bar automatically disappears after about 5 seconds.
Notes
• You cannot adjust the volume using the M/m buttons on the display
when the main menu is displayed on the screen. Use the 2 +/– buttons
on the remote control instead.
• You cannot adjust the volume using the M/m buttons on the remote
control.
• When your display is in power saving mode, no sound comes from the
speakers or the headphones.
34
Volume 30

Power saving function

This display meets the power-saving guidelines set by VESA and
NUTEK. If the display is connected to a computer or video
graphics board that is DPMS (Display Power Management
Standard) for Analog input/DMPM (DVI Digital Monitor Power
management) for Digital input compliant, the display will
automatically reduce power consumption as shown below.
MFM-HT75W
Power mode Power consumption
normal 68 W (max.)
operation
active off* 1.2 W (max.)
(deep sleep)**
MFM-HT95
Power mode Power consumption
normal 74 W (max.)
operation
active off* 1.2 W (max.)
(deep sleep)**
* When your computer enters the "active off" mode, the input signal is
cut and "No Input Signal" appears on the screen. After 5 seconds, the
display enters the power saving mode.
** "Deep sleep" is a power saving mode defined by the Environmental
Protection Agency.
Tip
When the display is in the standby mode or the Sleep timer is activated,
the 1 (power) indicator lights up in red.
(power)
1
indicator
green
orange
(power)
1
indicator
green
orange