Electrical Shock Hazard - Kenmore 795.7131 Manual De Uso Y Cuidado

REMOVING AND REPLACING
REFRIGERATOR DOORS
WARNING
Excessive Weight Hazard:
Use two or more people to remove and install the
refrigerator doors. Failure to do so can result in back or
other injury.
To remove the left refrigerator door:
CAUTION: Before you begin, remove food and bins
from the doors.
1. Open the door. Remove the top hinge cover screws (1).
2. Lift up the cover (2) and remove it.
3. Disconnect the wire harness (3).
4. Remove the grounding screw (4).
5. Remove the three bolts (5) using a 10mm socket
wrench. Lift off the top hinge (6).
CAUTION: When lifting the hinge, be careful that the
door does not fall forward.
6. Lift the door from the middle hinge pin and remove
the door.
7. Place the door, inside facing up, on a non-scratching
surface.
middle
hinge pin
(1)
(2)
(4)
(6)
(3)
(5)

Electrical Shock Hazard

• Disconnect the electrical supply to the refrigerator
before installing. Failure to do so could result in
serious injury or death.
• Do not put hands, feet or other objects into the air
vents, base grille, or bottom of the refrigerator. You
may be injured or receive an electrical shock.
To remove the right refrigerator door:
1. Open the door. Remove the top hinge cover screws (7).
2. Lift up the cover (8) and remove it.
3. Remove the three bolts (9) using a 10mm socket
wrench. Lift off the top hinge (10)
CAUTION: When lifting the hinge, be careful that the
door does not fall forward.
4. Lift the door from the middle hinge pin and remove
the door.
5. Place the door, inside facing up, on a non-scratching
surface.
13
REFRIGERATOR INSTALLATION
WARNING
(7)
(8)
(10)
(9)
middle
hinge pin