Klarstein ARABICA Manual Del Usuario página 23

What is the function of the small hook on the screen holder?
The hook prevents the sieve from falling out of the sieve holder when the powder is
emptied.
What is the function of the steam cap on the steam tube?
It ensures that the milk is swirled by the steam. This makes the milk foam firmer and finer.
Why can't the milk be frothed?
• Make sure that the milk used is cold.
• Do not froth the milk for too long. If it gets too hot, no milk foam can form.
What can you do if the bubbles in the milk foam are unevenly large?
Knock on the milk cup to remove large bubbles. Then shake the milk cup horizontally to
completely mix the milk and milk foam.
Which milk is suitable for frothing?
Low-fat milk is easy to foam, but the bubbles and foam are slightly larger and looser.
Whole milk is more difficult to foam, but the milk foam becomes thick and tough.
What to do if no steam comes out of the steam attachment?
• This is usually because the steam pipe and the steam cap have not been cleaned
after milk frothing and milk residues block the steam pipe.
• Try cleaning the pipe with a small cleaning brush.
• If this does not help, add vinegar and water to the water tank at a ratio of 1:1. Then
start the steam function to clean the hose. Then top up with fresh water and restart
the steam function.
• If the problem persists, contact your service representative.
EN
23