Charge The Battery - Orascoptic Zeon Discovery Manual Del Usuario

4. Battery Charger Connection Port (5)
The battery charger connects to this port. The plug
is a concentric design that fits in any orientation.
5. Battery Capacity Monitor (6)
Light will turn on, and a short beep will sound when
battery life is down to ten minutes. The beep will
reoccur every minute until the battery enters a shut-
down mode. During shut-down mode, the light will
blink, indicating that the battery has depleted its
capacity.

3. Charge The Battery

The Zeon Discovery battery is not completely
charged on delivery. The battery must be charged
for at least 3 hours before its first use. Beyond the
initial charge, no battery conditioning is required.
1. Plug the charger into the battery pack.
2. Plug the charger into the electrical outlet.
3. While charging, the light (1) on the charging unit
will show red. When the battery is fully charged,
the light will be green and the charger will switch
to a maintenance mode.
4. Install the correct adapter:
• United States – 110V
• Europe – 220V
• United Kingdom – 240V
• Australia – 240V
4
OPERATING INSTRUCTIONS
Discovery™ Portable LED Light System
5
6
1