Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS FOR
RECHARGEABLE UNITS
• Plug 12V wall charger cable into socket on the back of the fixture.
• Plug 12V charger into wall outlet to begin charging the work light.
• Charge work light until fully charged. The LED indicator will
turn green when the light is fully charged. Approximately 3 hours.
• Unplug fixture and your unit is now ready to use!
• Press the on/off switch on the rear of the unit to operate.
• Your fixture can be operated while plugged in. Simply leave
the work light plugged into the wall outlet and the light can be operated continuously.
IMPORTANT NOTES FOR RECHARGEABLE UNITS:
• Do not operate the unit under extreme temperatures and/or high humidity.
• Keep away from direct sunlight.
• Do not use abrasive cleaners. Clean with a damp cloth.
• Do not overcharge. Keep charging time less than 30 hours continuously.
• If the unit is to be stored for any length of time, charge unit before storing and then
every 3-4 months to maintain battery life.
• Ensure that the battery is charged promptly after it is run out.
TROUBLE SHOOTING FOR RECHARGEABLE UNITS
If light does not work check the following:
1. Be sure your unit is fully charged.
2. Make sure the on/off switch is in the ON position.
SAVE THESE INSTRUCTIONS!
Publicidad
