Kohler K-1162 Diagrama De Instalación página 2

21"
(53.3 cm)
3-1/8"
(7.9 cm)
10-13/16" (27.5 cm)
3-1/2"
(8.9 cm)
Product Information
Drop-in rim style
Fixture*: basin area
Bathing well 43" (109.2 cm) x
24-5/8" (62.5
cm)
water depth
To overflow 15" (38.1 cm)
* Approximate measurements for comparison only.
Pump: HP
1-speed 1.25
Heater kW
1.5
Minimum access panel pump/control:
20" (50.8 cm) W x 15" (38.1 cm) H
Included Components:
Cut-out template
Required Electrical Service (2 required)
Two dedicated circuits required, each protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Heater
1041938-1-B
4-5/8" (11.7 cm)
60" (152.4 cm)
3/8" (1 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
K-1162P-H shown
top area
53-1/2" (135.9
cm) x 32-1/8"
(81.6 cm)
capacity
57 gal (215.9 L)
V Hz A
120 60 7.5
V Hz A
120 60 12.5
required
1042556-7
120 V, 15 A, 60 Hz
120 V, 15 A, 60 Hz
No change in measurements if connected with
drain illustrated. (K-11677 or K-11677M)
Recommended faucet area
Pump/Control
Access
42" (106.7 cm)
21"
(53.3 cm)
19-1/2"
(49.5 cm)
Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
80 lbs/square foot (390 kg/square meter) loading.
weight
The suction line extends 4-3/4" (12.1 cm) beyond the edge of the
rim. The pump base extends 1/8" (3 mm) beyond the edge of the
110 lbs
rim. Modify the framing as needed.
(50 kg)
This fixture conforms to CSA B45 and ANSI Standard Z124.1. All
dimensions are nominal.
2
1-1/2"
(3.8 cm)
Drop-In Rim Detail
1-1/2" OD
Kohler Co.