Urmet 1183/3 Manual Del Usuario página 8

BUTTONS FUNCTIONS
STATE STAND-BY WAITING FOR
AND ON HOOK PICK-UP
BUTTON (receiving a call)
Special Special
BUTTON
function 1 function 1
Special Special
BUTTON
function 2 function 2
Garage door Garage door lock
BUTTON
lock release release
Door lock Door lock
release release
Special Special
1
function 3 function 3
Special Special
2
function 4 function 4
Special Special
3
function 5 function 5
Special Special
4
function 6 function 6
Special Special
5
function 7 function 7
Special Special
6
function 8 function 8
Automatic door Automatic door lock
7 lock release release
OPTIONAL PROGRAMMING FOR ADDITIONAL FUNCTIONS
The following programming operations are needed after testing the basic operation of the system, only if
are required.
INDOOR STATION INTERCOM FUNCTION
Buttons , , or buttons from 1 to 6 can be programmed in 2Voice systems for intercom call
functions.
One button can be programmed to call another user in the column or to call an indoor station in parallel. All
indoor stations of the called user will ring in the fi rst case. Only the specifi cally programmed indoor station
will ring in the second case.
14
AUDIO STAND-BY
AND OFF-HOOK
Special Programmable intercom call 1
function 1 (Default: not programmed)
Special Programmable intercom call 2
function 2 (Default: call to switchboard)
Garage door Programmable intercom call 3
lock release (Default: not programmed)
Door lock Door lock
release release
Special Programmable intercom call 4
function 3 (Default: not programmed)
Special Programmable intercom call 5
function 4 (Default: not programmed)
Special Programmable intercom call 6
function 5 (Default: not programmed)
Special Programmable intercom call 7
function 6 (Default: not programmed)
Special Programmable intercom call 8
function 7 (Default: not programmed)
Special Programmable intercom call 9
function 8 (Default: not programmed)
Automatic Automatic door lock release
door lock
release
DS1183-005A
INTERCOM FUNCTION BETWEEN VARIOUS USERS
– Go to the indoor station to be programmed as caller (indoor station A).
– Hold the door opener button pressed and pick up the handset. The indoor station A outputs a tone to
indicate that programming mode is in progress.
A
1
– Press the button to be programmed. The indoor station will output a confi rmation tone. Buttons can be
, , or buttons from 1 to 6.
A
3
– Go to the user that the button will call (user B) and press the door opener button. The indoor stations will
be beep to indicate that they have been programmed.
Alternatively, go to a calling station and press the calling button of user B. The indoor station being
programming (A) will beep to indicate that it has been programmed. The indoor stations of user B will ring
when this occurs. Ignore this call.
B
– Hook up the handset of indoor station A. It will beep to indicate exit from programming mode.
– Check programmed function: release the handset A and press the programmed button. Check that all
indoor stations of user B ring and check audio.
– You will need to program indoor station B to call A to make the opposite call possible.
DS1183-005A
2
USER B
15