Panasonic KX-TGA100N Manual De Instalación página 2

1
Getting Started
1-A Accessories
Charger unit ....................1
Order No. PQWETGA100N
Battery ............................1
Order No. PQWBTG1000N
Belt Clip ..........................1
Order No. PQZHTG1000N
Handset Cover ................1
Order No. PQYNTG1000N
• For extra orders, call 1-800-332-5368.
3
Things You Should Know
3-A Belt Clip
You can hang the handset on your belt or pocket using the belt clip.
To attach the belt clip
3-B Optional Headset
Plugging an optional headset into the handset allows a hands-free phone
conversation. Please use only the Panasonic KX-TCA88 headset.
To order, call the accessories telephone number in section 1-A.
Connecting the optional headset to the handset
Open the headset jack cover,
and connect the optional
headset to the headset jack
as shown.
When the optional headset is connected to the handset, make sure to use the
headset to talk with the caller. If you want to have a normal cordless phone
conversation, disconnect the headset.
1-B Location of Controls
Handset
Speaker
Display
Function Buttons
Headset Jack
Charge Contacts
Charger unit
AC Adaptor
Charge Contacts
Charger
To remove the belt clip
H
Headset
Jack
1-C Settings
Connect the charger unit as shown.
1
• The AC adaptor must remain connected at all times. (It is normal for the adaptor to
feel warm during use.)
Install the battery in the handset.
2
Install the battery in the handset with the charge contacts
facing down and close the handset cover, locking it into place.
3-C Battery Replacement
If "LOW BATTERY" is displayed and/or "
replace the battery with a new Panasonic PQWBTG1000N battery.
To order, call the accessories telephone number in section 1-A.
Remove the cover by sliding
1
while pressing the arrow.
Replace the battery in the
2
handset with the charge
contacts facing down.
3 Close the cover.
Make sure to charge the
new battery for 12 hours.
3-D Wall Mounting
The charger can be wall mounted.
Install screws using the wall
template below. Mount the charger,
then slide it down.
Wall Template
Power Outlet
(AC 120 V, 60 Hz)
AC Adaptor
H
Charge
Contacts
" flashes after being fully charged,
Charge
Contacts
Screws
To Power
Outlet