Manual Shut Off; Auto Shut Off; Led; Warning Indicators - Baxtran GLASSKS Manual Del Usuario

• Condition 2: "TARE" function when total sum of all loads on
scale > 4% of scale's max capacity. (4%=80g when capacity is
2kg; 200g when capacity is 5kg)
LED will show "----" or "0g" each time
means not stable, please wait for a moment. "0g" and mean-
while an icon "TARE" on upper left corner of LED mean "TARE"
function is active. Max. capacity is reduced by total weight of all
loads.
Under this condition:
By pressing , you can see the total weight of all loads on the
sacale. If you want to weigh more loads, just press
LED reading to "0" again.

5. MANUAL SHUT OFF

6. AUTO SHUT OFF

Auto shut-off occurs if display shows '0' or
shows the same weight reading for 1minute.
is pressed. "-----"
to reset
To maximize battery life, always
press for 3 seconds to turn off
the scale after using.
USER MANUAL GLASS KS

7. LED

Tare weight
Negative Value
Pounds

8. WARNING INDICATORS

1. Replace new battery
2. Scale overload. Remove item to avoid damage. Max. Weight
capacity is indicated on the scale.

CLEANING AND CARE

1. Clean the scale with a slightly damp cloth. DO NOT im-
merse the scale in water or use chemical/abrasive cleaning
agents.
2. All plastic parts should be cleaned immediately after
contact with fats, spices, vinegar and strongly flavored/co-
lored foods. Avoid contact with acids citrus juices.
3. Alwais use the scale on a hard, flat surface.
DO NOT use on carpet.
4. DO NOT strike, shake or drop the scale.
5. The scale is high precision device. Plase take care of it.
6. Please keep it dry.
7. Plase checkwhether battery is installed or in high level if
scale can not be turned on.
8. The scale is for family use only, not for commercial pur-
pose.
EN
Ounces
Grams
5