Horizon Global 36644 Instrucciones De Instalación página 5

4. Using tape, install block (part. 01097002) between the hitch and the
frame at the access hole.
6. Tighten all 7/16-14 Gr5 fasteners with torque wrench to 50 Lb.-Ft. (
68 N*M). Note: a universal joint socket may be required to tighten the
rearmost bolts.
Proper torque is needed to keep the hitch secure to the vehicle when towing.
©2017 Horizon Global Americas Inc. - Printed in Mexico
5. Install hitch – Raise hitch into position being careful not to push
fasteners back into the frame. Loosely install the conical washers
(item 2) and hex nuts (item 3) onto carriage bolts, (4) places.
7. Raise muffler – raise muffler back into position and reattach rubber
hangers, (2) per side and (1) in the middle.
Sheet 5 of 15 36644NP 09-08-17 Rev. A