Publicidad
Idiomas disponibles
Idiomas disponibles
Your wireless chime has different selectable tunes: Ding (one note), Ding-
Dong (two note), or Westminster (eight note) (Available on selected chimes).
The factory setting is for the Ding-Dong tune (or Westminster, when avail-
able). This tune can be changed by following the instructions below.
• Ding (one note tune)
Pushbutton: Add a jumper to location 8.
• Ding-Dong (two note tune)
Pushbutton: Remove jumper from location 8.
Chime: Remove jumper from location 8.
• Westminster (Eight note tune) (Available on selected chimes)
Pushbutton: Remove jumper from location 8.
Chime: Add a jumper to location 8.
Note: All models have both front and back door tune capabilities. We recom-
mend the back door use the Ding tune and the front door use the Ding-
Dong tune (or Westminster tune, available on selected chimes). Models
that include two pushbuttons will come factory set for front and back doors.
Decals on the rear of the pushbutton will indicate its setting.
Remove screw to
open access door
595-5684-06
Tune Settings
Install an alkaline type A23 12 Volt bat-
tery. The positive terminal should be po-
sitioned as shown.
Back of
Chime
Tune Setting
(Not used on
all models)
Note: Some models might require the use of
tweezers to remove and replace the jumpers.
Pushbutton Battery Replacement
Inside
Pushbutton
-3-
* Code Settings 1-7
Must Match Both
Pushbutton and
Chime
Tune Setting
Publicidad
