Treating With Silk'n Facefx For The First Time - Home Skinovations FaceFX Manual Del Usuario

Treating with Silk'n FaceFX for the First Time

The skin should be clean, dry and free of any powder, gel or
cream.
If necessary a light oil based serum may be applied thinly to the
skin to help glide the device. Allow serum to absorb into the
skin before treating. See "Cleaning Silk'n FaceFX" section, p.13.
Remove Silk'n FaceFX APPLICATOR, ADAPTOR and other
components from the box.
Connect the ADAPTOR to the APPLICATOR
Connect the ADAPTOR to an electrical outlet
Press the POWER ON/OFF SWITCH. The green READY/
TREATMENT INDICATOR LIGHT (K) will start blinking, and
shortly afterwards will be lit steadily.
Your FaceFX is ready for treatment.
Place the TREATMENT SURFACE
on your skin. The LED light will
automatically activate.
Apply light pressure while slowly
moving the FaceFX APPLICATOR
in small circular motions. The
TREATMENT SURFACE temperature
will slowly increase.
11