Kohler STERLING 66050100 Guia De Instalacion página 8

Whirlpool
1/16"
(2 mm)
Tile
Brick
Approved Tile Backing
Approved Tile Backing
2. Prepare the Site - Island Installation
IMPORTANT! Risk of product damage. Do not support the whirlpool by the rim.
Make sure that the flooring offers adequate support for your whirlpool, and verify that the subfloor
is flat and level.
This whirlpool may be installed next to the wall or in an island installation. An island installation
requires a four-side surround. The deck must be supported by brick or concrete.
Provide access panels as required to service the pump.
Construct brick or concrete supports.
Provide a 1/16" (2 mm) gap between the whirlpool rim and the concrete or brick framing. Frame
the floor, or construct a frame for a raised installation, in accordance with the roughing-in
information packed with the unit.
1016904-2-C
Tile
Brick
8
Whirlpool may be installed
next to the wall or as an
island installation.
Typical
access
panel
Install an access panel to allow
the pump to be serviced.
Sterling