Preparation - LF Allen + Roth EASTVIEW LP8074DLAZ Manual Del Usuario

SAFETY INFORMATION
Consult the dealer or an experienced radio/TV technician for help.
Note: For a Class A digital device, statements of 15. 105(a) must be included when appropriate
forthe device in question.
The net weight of this fan is: 26.01 lbs.
WARNING
To reduce the risk of fire, electrical shock, or personal injury, wire connectors provided with this
fan are designed to accept only one 12-gauge house wire and two lead wires from the fan. If
your house wire is larger than 12-gauge or there is more than one house wire to connect to the
two fan lead wires, consult an electrician for the proper size wire connectors to use. Before
cutting, drilling or hammering, verify their location. If needed, contact your electrician, plumber
or service person.
To reduce the risk of fire, electric shock, or personal injur
installing them, balancing the blades, or cleaning
the rotating fan blades. Mount to outlet box marked "ACCEPTABLE FOR FAN SUPPORT" and
use mounting screws provided with the outlet box. Most outlet boxes commonly used for the
support of lighting fixtures are not acceptable for fan support and may need to be replaced.
Consult a qualified electrician if in doubt.
To reduce the risk of electric shock, disconnect the electrical supply circuit to the fan before
installing light kit.
To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
Use this unit only in the manner intended by the manufacturer. If you have question, contact the
manufacturer.
A diagram showing the fan, intended mounting means and ceiling outlet box with fan canopy covering
the outlet box.
After making the wire connections, the wires should be spread apart with the grounded conductor and
the equipment-grounding conductor on one side of the outlet box and the ungrounded conductor on
the other side of the outlet box.
The splices after being made should be turned upward and pushed carefully up into the outlet box.
This fan is to be used in dry locations onl
CAUTION
assembly diagrams.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not
attempt to assemble the product.
Estimated Assembly Time: 60 minutes
Tools Required for Assembly (not included): Phillips screwdriver, 1/4 in. flathead screwdriver,
wire stripper and step ladder.
Helpful Tools (not included): AC tester light, do-it-yourself wiring handbook and wire cutters.
y, do not bend the blade arms when
y.
re installing the new fan. Review accompanying
5
Lowes.com/allenandroth