Service & Maintenance; Warranty - FISCHER Darex 714005 Instrucciones

5. SERVICE & MAINTENANCE
The FISCHER DAREX machines have been designed to operate over а long period of
time with а minimum of maintenance. Continuous satisfactory operation depends upon
proper machine care and regular cleaning.
Cleaning
Keep the measuring tool clean at all times.
Never immerse the measuring tool in water or other liquids. Wipe off any dirt using a
damp, soft cloth. Do not use any detergents or solvents. The areas around the outlet
aperture of the laser in particular should be cleaned on a regular
basis. Make sure to check for lint when doing this.
Faults
Should a fault occur e.g. after wear of a part, please contact the service address on the
warranty card. In the back of this manual you find exploded view showing the parts that
can be ordered.
Environment
To prevent damage during transport, the appliance is delivered in solid
packaging which mainly consists of reusable materials. Therefore please make
use of options for recycling the packaging.
Faulty and/or discarded electrical or electronic apparatus have to be
collected at the appropriate recycling locations

6. WARRANTY

1. FISCHER DAREX products are designed to highest DIY quality standards. FISCHER
DAREX provides a 5 years warranty for its products, from the date of purchase. This
warranty applies to all material and manufacturing defects which may arise. No further
claims are possible, of whatever nature, director indirect, relating to people and/or
materiais. FISCHER DAREX products are designed to highest DIY quality standards.
2. In the event of a problem or defect, you should first always consult your dealer. In
most cases, the FISCHER DAREX dealer will be able to solve the problem or correct the
defect.
3. Repairs or the replacement of paru will not extend the original warranty period.
4. Defects which have arisen asa result of improper use or wear are not covered by the
warranty. Amongst otherthings, this relates to switches and motor, in the event of wear.
5. Your claim upon the warranty can only be processed if:
Proof of the purchase date can be provided in the form of a receipt
The guarantee card has been completed in full
No repairs and/or replacements have been carried out by third parties
The tool has not been subjected to improper use (overloading of the machine or fitting
nonapproved accessories).
39
EN