Troubleshooting - Daewoo International DLX-1088 Manual De Usuario

Will laser hair removal work for me?
Due to the fact that a laser targets melanin, the more melanin an
individual has in his/her hair, the more effective a laser will be. Light
skin and dark hair are the best combination for laser hair removal,
however DLX-1088 uses a diode laser which has a longer wavelength
than other lasers used for hair removal, which may improve treatment
results even on the darkest skin types.
These side effects include burns, blisters, and even
hyper-pigmentation. But, the chance is less than 1% and it goes away
soon. Extra care should be taken to avoid sun exposure after
treatments with DLX-1088 for 2~3 days.
It is ok to take a shower after treatment. But avoid hot water in shower for
1 to 2 days.
Don't treat the same area of skin more than once per hair removal
session. Try to avoid overlapping treatments.

Troubleshooting

The device doesn't work when I put the skin contact bar to skins Check.
That you plugged the power cord into the DLX-1088 and outlet. Unlock
the laser with the safety key. Make sure Skin Contact Bar keeping
contact with skins.
You hear the beep sound.
This beep sound that makes the go signal that the laser is now
activated.
The device is getting hot.
The device can be getting hot by absorbing the heat if you use it for a
long time.
14