Eaton WFD30 Instrucciones De Instalación

ENGLISH
WFD30-WI-FI SMART UNIVERSAL DIMMER FOR DIMMABLE LED/CFL/INC/MLV/ELV/HAL/FLR
WARNINGS AND CAUTIONS:
Press to Brighten
• Turn OFF circuit breaker or remove Appuyer pour augmenter
l'intensité lumineuse
Air Gap Switch
fuse(s) and test that power is OFF
Presione para AUMENTAR
Interrupteur d'entrefer
before installation process.
EL BRILLO
Interruptor de entrehierro Press to BRIGHTEN
Air Gap Switch
• Never wire any electrical device with
ON Button
power turned ON. Wiring dimmer HOT may
Bouton marche ON Button
cause permanent damage to
Botón ON (ENCENDIDO)
dimmer and void warranty.
LED Light Light level may
LED Light Level Indicator
• If you are not sure about any part of these
Témoin à DEL de Level Indicator be adjusted with
l'intensité lumineuse
instructions, please contact a licensed lights ON or OFF
Indicador LED de nivel
electrician.
de luz
OFF Button OFF Button
IMPORTANT: Wi-Fi Smart Universal Dimmer
Bouton arrêt
Press to DIM
Press to DIM
will not work or will be damaged if wired Botón OFF (APAGADO)
Appuyer pour réduire
incorrectly and warranty will be voided.
l'intensité lumineuse
Refer to wiring instructions provided. Presione para REGULAR
CAUTION
• Use only with 120V/AC 60 Hz.
• Do not exceed maximum rating of dimmer as indicated on the device.
• Must be installed and used in accordance with all national and local electrical codes.
• If a bare copper or green ground connection is not available in the wallbox, contact a licensed electrician for
installation.
• Use only #14 or #12 copper wire rated for at least 75º C with these devices. DO NOT USE WITH ALUMINUM
WIRE.
NOTE: The Wi-Fi Smart Universal Dimmer is wired directly to the light fixture. For Multi-location applications
(3-Way or 4-Way), the Accessory Dimmer (WACD) or a regular 3-Way switch with one Wi-Fi Smart Universal
Dimmer can be used.
WI-FI SMART UNIVERSAL DIMMER INSTALLATION INSTRUCTIONS:
GETTING STARTED
Download the Amazon Alexa App and use the quick start guide provided to start the installation process. The
LED indicator will stop blinking once the device is added to the Amazon Alexa App.
Single Location Control Installation
(requires one Master Dimmer)
Single Location Control Installation (requires one Wi-Fi smart universal dimmer)
Installation de la commande à un emplacement unique (un gradateur intelligent
universel Wi-Fi requis)
Instalación de control de ubicación única (requiere regulador de iluminación
inteligente universal Wi-Fi de luz)
Hot
Black
Neutral
Sous tension
Noir
Neutre
Neutral Black Caliente Hot
Negro
Neutro
120V
120V
Load
Charge
Carga Load
Light Fixture
Light Fixture Luminaire
Luminaria
Ground
Mise à la terre
Tierra
Multiple Locations using several Accessory Dimmers (WACD)
Neutral
Neutre
Neutro
Neutral
Multiple Locations Using Several Accessory Dimmers (WACD)
Emplacements multiples liés à plusieurs gradateurs auxiliaires (WACD)
Múltiples ubicaciones con varios reguladores complementarios (WACD)
Hot
Traveler wire 1 Traveler wire 1
Sous tension
Fil voyageur 1 Fil voyageur 1
Caliente
Cable guía 1 Cable guía 1
120V
Neutral Black Neutral Black
Neutre Noir Neutre Noir
Neutro Negro Neutro Negro
3-Way 3-Way
3 voies 3 voies
3 vias 3 vias
Green Ground Green Ground
Vert Mise a la terre Vert Mise a la terre
Verde Tierra Verde Tierra
Traveler wire 2 Traveler wire 2
Fil voyageur 2 Fil voyageur 2
Cable guía 2 Cable guía 2
For more information, visit www.eaton.com/smarthome
Light level may be adjusted
with lights ON or OFF
Niveau de luminosité
réglable, que les lumières
soient allumées ou éteintes
OPERATION INSTRUCTIONS
El nivel de luz se puede
ajustar con las luces
• Press ON button to turn lights ON at previously selected level.
encendidas o apagadas
• Press OFF button to turn lights OFF.
• The bottom LED indicates the dimmer is turned ON
• When lights are OFF, press and hold the ON button for 2 seconds for full brightness.
• When the lights are ON, press and hold the OFF button for 2 seconds until the LED indicator blinks. After a 10
second delay, the lights will fade off.
FACTORY RESET: The dimmer can be reset which will exclude the device from its network and restore all factory
defaults.
• Turn ON the dimmer
• Press and hold the ON button for 30 seconds until the LED indicator blinks for the fourth time.
• Release the button
• LED indicator will start flashing fast while it is being reset
• The LED indicator will then start blinking at a normal rate indicating the dimmer is not part of a Wi-Fi network
For more advanced features including adjusting the brightness level of the LED
indicators, please refer to our configuration parameters
DIMMER RATING
Load Type Single Gang
WFD30 INC/ELV/FLR/HAL/MLV 600W
CFL/LED 450W
Two Location Control Installation (requires one Wi-Fi smart universal dimmer and one Accessory)
Two Location Control Installation (requires one Smart universal and one Accessory)
Installation de la commande à deux emplacements (un gradateur intelligent universel Wi-Fi requis)
Instalación de control de dos ubicaciones (requiere regulador de iluminación inteligente universal Wi-Fi de luz)
Hot Traveler wire 1
Sous tension Fil voyageur 1
Caliente Cable guía 1
120V
Neutral Black Neutral
Neutre
Noir Neutre
Neutro Negro Neutro
3-Way
3 voies
3-Way
3 vias
3 voies
3 vías
Green Ground
Ground Green
Vert Vert Mise à la terre
Mise a la terre
Verde Tierra
Tierra Verde
Traveler wire 2
Fil voyageur 2
Cable guía 2
Traveler wire 1 Traveler wire 1
Fil voyageur 1 Fil voyageur 1
Cable guía 1 Cable guía 1
Neutral Black Neutral
Neutre Noir Neutre
Neutro Negro Neutro
3-Way
3-Way
3 voies 3 voies
3 vías
3 vías
Green Ground
Vert Mise à la terre
Verde Tierra
Traveler wire 2
Fil voyageur 2
Cable guía 2
ENGLISH
WFD30-WI-FI SMART UNIVERSAL DIMMER FOR DIMMABLE LED/CFL/INC/MLV/ELV/HAL/FLR
Two Location Control Using a 3-Way Switch
(requires one Wi-Fi smart universal dimmer and one standard 3-way switch)
Commande à deux emplacements liée à un interrupteur à 3 voies
(nécessite un gradateur universel intelligent Wi-Fi et un interrupteur à
3 voies standard)
Control de dos ubicaciones mediante un interruptor de 3 vías
(requiere un atenuador universal inteligente Wi-Fi y un interruptor
estándar de 3 vías)
WI-FI SMART UNIVERSAL DIMMER COLOR CHANGE KIT INSTRUCTIONS
INSTRUCTIONS POUR LA TROUSSE DE CHANGEMENT DE COULEUR DU GRADATEUR INTELLIGENT UNIVERSEL WI-FI
INSTRUCCIONES DEL KIT DE CAMBIO DE COLOR DEL REGULADOR
STEP 1: Pull out the air gap switch
at the top of the device and then
squeeze the top tabs on both
sides of the device.
ÉTAPE 1 : Retirer l'interrupteur
d'entrefer sur le dessus de
l'appareil, puis serrer les
languettes supérieures des deux
côtés.
PASO 1: Tire del interruptor de
entrehierro en la parte superior
del dispositivo y, a continuación,
encaje las pestañas superiores
de ambos lados del dispositivo.
NOTE: Not all products include color change kits.
2-Gang 3-Gang
REMARQUE : Certains produits ne comprennent pas de trousse de
500W/VA 400W/VA
NOTA: No todos los productos incluyen kits de cambio de color. changement de couleur.
450W 400W/VA
TROUBLESHOOTING GUIDE
Symptom
Device does not function. The LEDs indicators are OFF
Erratic operation or flickering LEDs.
Lights turn ON after long delay
Black
Noir
Negro
Device functions normally using the dimmer push buttons but not
from Amazon Alexa App. One of the LED indicators blinks ON and
Load OFF about once per second
Charge
Carga
Device functions normally both locally and from the Amazon Alexa
App but can't be controlled from the accessory dimmer (WACD)
Light Fixture
Luminaire
Luminaria
Dimmer is warm to touch after a period of time
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1: This device may not cause harmful interference, and
Neutral
Neutre 2: This device must accept any interference received, including interference that may cause undesired operation.
Neutro
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION: Any changes or modifications not expressly approved by Eaton Wiring Devices could void the user's authority to operate the equipment.
This device complies with Industry Canada's license-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
Black
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
Noir
Negro
BEFORE INSTALLATION!
Load EATON WIRING DEVICES LIMITED 2 YEAR WARRANTY
Charge Eaton Wiring Devices warrants its Dimmer to be free of defects in materials and workmanship in normal use and service for a period of two years from date of original purchase. THIS TWO (2) YEAR LIMITED WARRANTY IS IN LIEU
Carga
OF ALL OTHER WARRANTIES, OBLIGATIONS, OR LIABILITIES, EXPRESSED OR IMPLIED (INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE THAT IS IN DURATION IN EXCESS
OF TWO YEARS FROM THE DATE OF ORIGINAL CONSUMER PURCHASE). NO AGENT, REPRESENTATIVE, OR EMPLOYEE OF EATON HAS AUTHORITY TO INCREASE OR ALTER THE OBLIGATIONS OF EATON UNDER THIS WARRANTY. To
obtain warranty service for any properly installed Eaton Dimmer that proves defective in normal use send the defective Dimmer prepaid and insured to Quality Control Dept., Eaton Wiring Devices, 203 Cooper Circle, Peachtree City, GA
Light Fixture
30269; in Canada: Eaton Wiring Devices, 5925 McLaughlin Road, Mississauga, Ontario L5R 1B8. Eaton will repair or replace the defective unit, at its option. Eaton will not be responsible under this warranty if examination shows that
Luminaire
the defective condition of the unit was caused by misuse, abuse, improper installation, alteration, improper maintenance or repair of damage in shipment to Eaton. EATON SHALL HAVE NO RESPONSIBILITY FOR INSTALLATION OF THE
Luminaria
DIMMER, OR FOR ANY PERSONAL INJURY, PROPERTY DAMAGE, OR ANY SPECIAL, INCIDENTAL, CONTINGENT, OR CONSEQUENTIAL DAMAGES OF ANY KIND, RESULTING FROM DEFECTS IN THE DIMMER OR FOR BREACH OF ANY
Green Ground
EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THE EXCLUSIVE REMEDY FOR BREACH OF THE LIMITED WARRANTY CONTAINED HEREIN IS THE REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT AT EATON'S OPTION.
Vert Mise à la terre
IMPLIED WARRANTIES (IF ANY) INCLUDING, BUT NOT LIMITED TO IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY, ARE LIMITED IN DURATION TO A PERIOD ENDING TWO YEARS FROM
Verde Tierra
Neutral
THE DATE OF ORIGINAL CONSUMER PURCHASE. IN NO CASE SHALL EATON'S LIABILITY UNDER ANY OTHER REMEDY PRESCRIBED BY LAW EXCEED THE PURCHASE PRICE. Some states do not allow the exclusion or limitation of
Neutre
incidental or consequential damages or allow disclaimers or modifications of or limitations on how long an implied warranty lasts, so the above limitations may not apply to you. Some Canadian provinces do not allow exclusion or vari-
Neutro
ance of implied warranties so that some or all of the above limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state and province to province.
Read enclosed instructions carefully. If you have any questions concerning use or care of this product, please write: Consumer Service Division, Eaton Wiring Devices, 203 Cooper Circle, Peachtree City, GA 30269.
www.eaton.com
www.eaton.com/wiringdevices
EIS-0252-EFS (REV. B)
Hot
Traveler wire 1
Sous tension Fil voyageur 1
Caliente Cable guía 1
120V
Neutral
Neutre
Neutro
3-Way
3 voies
3 vias
Common
Commun
Neutro
Green
Ground
Vert
Mise a la terre
Verde
Tierra
Traveler wire 2
Fil voyageur 2
Cable guía 2
STEP 2: Pull faceplate off STEP 3: Line up all tabs and snap
ÉTAPE 2 : Retirer le plateau de montage. the faceplate on and push the air
PASO 2: Retire la placa frontal gap switch in.
ÉTAPE 3 : Aligner toutes les languettes,
encliqueter le plateau de montage et
pousser l'interrupteur d'entrefer vers
l'intérieur.
PASO 3: Alinee todas las pestañas
y encaje la placa frontal; luego,
presione el interruptor de
entrehierro hacia dentro.
Possible Cause Solution
A) Circuit breaker is OFF or tripped A) Turn ON the circuit breaker
B) Air Gap switch on the dimmer is pulled out to the OFF position B) Push in the Air Gap switch on the dimmer
C) Improper wiring C) Check and correct wiring
D) Defective dimmer D) Replace dimmer
A) Loose wiring connections A) Check wiring and follow instructions provided with the device
B) Low dim setting B) Set minimum brightness to a higher level
A) Rapid start feature is disabled A) Enable rapid start feature
B) Low dim setting B) Set minimum brightness to a higher level
A) Dimmer is not included in the Wi-Fi network A) Include the dimmer in the Wi-Fi network using Amazon Alexa App
B) No Wi-Fi signal B) Check that the router is functioning properly
C) Go through the Factory Reset procedures and re-add the device to the Amazon Alexa App.
A) The 3-Way wire is not connected A) Refer to the wiring connection and check if the 3-Way wire is connected
A) This is normal if the load is within the dimmer limits A) No action required
Black
Noir
Negro
Load
Charge
Carga
Light Fixture
Luminaire
Luminaria
Ground
Mise a la terre
Tierra
Neutral
Neutre
Neutro
www.eaton.com
www.eaton.com/wiringdevices
EIS-0252-EFS (REV. B)