Clock Display - Klarstein MR. FROST Manual Del Usuario

CLOCK DISPLAY

This unit is supplied with CLOCK dipalying function. If the displayed time is not correct,
you can adjust it to the correct digit through the CLOCK and SELECT button.
First press the CLOCK button once, the digit meaning hour will
start to flash first, then you can press SELECT button to change
it, each press will increase 1 hour. Press the CLOCK button
again, the digit meaning minute then will start to flash, and
also press the SELECT to change it.
Then press the CLOCK the third time to confirm it, and now it
display the new correct clock. And during adjusting process,
after 5 seconds flashing, the digit will automaticall change to
always displaing, also means the new clock
EN
19