Mansfield Dual-Drill DD18 Manual De Operación Del Usuario página 2

RULES FOR SAFE OPERATIONS
Congratulations with your new innovative combined power drill / screw driver.
Most working tasks today require drilling and screwing. Professional craftsmen therefore have 2 machines, one for each process. DIY´s mostly
change between drill bit and screw bit, which takes a lot of time. With this unique DualDrill we have combined 2 machines and offer you as a DIY
a product that not only reduce the time you spend when working with your new DualDrill, it takes op less space en your toolbox, and fi nally at
makes drilling and screwing much funnier.
General Safety Rules
Thank you for buying a Mansfi eld power tool.
Our products is manufactured to high standards for dependability and properly cared for, it will give you years of trouble free performance.
Important: Make sure that the user has carefully read and understood this entire owner's manual before using this tool. Pay close attention to the
rules for safe operation, Warnings and Cautions. Use your tool properly and only for what it is intended.
The use of safety symbols in this manual is to attract your attention to possible dangers. The safety symbols, and the explanations with them,
require your full understanding. The safety warnings do not by themselves eliminate any danger, nor are they substitutes for proper accident
prevention measures.
Symbol: This Safety Alert Symbol indicates caution, warning or danger. Failure to obey a safety warning can
!
result in serious injury to yourself or others. To reduce the risk of injury, fi re, or electric shock always follow safety
precautions.
Know your tool
Safe operation of this tool requires that you read and fully understand
this owner's manual and all labels affi xed to the tool.
Learn its applications and limitations as well as the potential hazards
peculiar to a power tool. Keep this manual readily available for future
references.
Important
Servicing of a power tool requires extreme care and knowledge
and should be performed only by a qualifi ed service technician. For
service and repair, contact any Authorized Service Centre.
CAUTION: Do not attempt to operate this
! tool until you have thoroughly read and
completely understood all instructions,
safety rules, etc., contained in this manual.
Failure to comply can result in accidents
involving fi re, electric shock, or serious
personal injury. Save the Owners Manual
and review frequently for continuing safe
operation and for instruction others who
may use this tool.
WARNING: When using power tools,
basic safety precautions should always be
!
followed to reduce the risk of fi re, electric
shock, and personal injury, including the
following precautions.
READ ALL INSTRUCTIONS THOROUGHLY
General safety precautions
Keep the work areas clean. Cluttered work areas and work benches
invite injuries.
Consider Work Area Environment. Keep work area well lit. Do not
use tool in presence of fl ammable liquids and gases.
Guard Against Electric Shock By Preventing Body Contact
With Grounded Surfaces. For example: pipes, radiators, ranges,
refrigerators and other household appliances.
Keep Children and bystanders away while operating the tool: Do
not let visitors contact tool or extension cord. All visitors should be
kept away from work areas.
Store idle Tools. When not in use, tools should be stored in a dry,
high and/or locked place out of reach of children.
Do not force Tool. It will do the job better and safer at the rate which
it was intended.
Wear proper clothing. Do not wear loose clothing or jewellery. They
can be caught in moving parts. Robber gloves and non-skid footwear
are recommended when working outdoors. Wear protective hair
covering to contain long hair.
Use safety Glasses. Also use face or/and dust mask if cutting
operation is dusty.
Secure Work. Use clamps or a visa to hold work piece. It is safer
than using uour hand and it frees both hands to operate the tool.
Do Not Overreach. Keep proper footing and balance at all times.
Maintain Tools with care. Keep tools sharp and clean for better and
safer performance. Follow instructions for lubricating and changing
accessories. Keep handles dry, clean and free from oil and grease.
Disconnect Battery Pack. When not in use, before servicing, when
changing accessories such as blades, bits and cutters.
Avoid Unintentional Starting. Do not carry the tool with your fi nger
on the switch. Be sure that switch is off when installing battery pack
or bits.
Stay Alert. Watch what you are doing. Use common sense. Do not
operate tool when you are tired.
Check damaged parts. Before further use of the tool, a guard or
other parts that is damaged should be carefully checked to determine
that it will operate properly and perform its intended function. Check
for alignment of moving parts, binding of moving parts, breakage of
parts, mounting, and any other conditions that may alter its operation.
Any part that is damaged should be properly repaired or replaced by
an Authorized Service Centre. Have defective switches replaced at
an Authorized Service Centre. Do not use tool if switch does not turn
on and off.
1