Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT SAFETY INSTRUCTIONS
IMPROPER OPERATION OR MAINTENANCE OF THIS PRODUCT COULD RESULT IN SERIOUS INJURY AND PROPERTY
DAMAGE. READ AND UNDERSTAND ALL WARNINGS AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT.
RISK OF EXPLOSION OR FIRE
WHAT CAN HAPPEN
GASOLINE AND GASOLINE VAPORS CAN BECOME IGNITED
BY COMING INTO CONTACT WITH HOT COMPONENTS SUCH
AS THE MUFFLER, FROM ENGINE EXHAUST GASES, OR
FROM AN ELECTRICAL SPARK.
COMBUSTIBLE MATERIALS WHICH COME INTO CONTACT
WITH HOT ENGINE PARTS CAN BECOME IGNITED.
UNATTENDED OPERATION OF THIS PRODUCT COULD
RESULT IN PERSONAL INJURY OR PROPERTY DAMAGE.
AIR TANK: THE FOLLOWING CONDITIONS COULD LEAD TO A WEAKENING OF THE TANK, AND RESULT IN A
VIOLENT TANK EXPLOSION AND COULD CAUSE PROPERTY DAMAGE OR SERIOUS INJURY.
WHAT CAN HAPPEN
1. FAILURE TO PROPERLY DRAIN CONDENSED WATER
FROM THE TANK, CAUSING RUST AND THINNING OF THE
STEEL TANK.
2. MODIFICATIONS OR ATTEMPTED REPAIRS TO THE TANK.
3. UNAUTHORIZED MODIFICATIONS TO THE UNLOADER
VALVE, SAFETY VALVE, OR ANY OTHER COMPONENTS
WHICH CONTROL TANK PRESSURE.
4. EXCESSIVE VIBRATION CAN WEAKEN THE AIR TANK AND
CAUSE RUPTURE OR EXPLOSION. EXCESSIVE
VIBRATION WILL OCCUR IF THE COMPRESSOR IS NOT
PROPERLY MOUNTED OR IF THE ENGINE OPERATES
ABOVE RECOMMENDED RPM.
ATTACHMENTS & ACCESSORIES:
EXCEEDING THE PRESSURE RATING OF AIR TOOLS, SPRAY
GUNS, AIR OPERATED ACCESSORIES, TIRES AND OTHER
INFLATABLES CAN CAUSE THEM TO EXPLODE OR FLY
APART, AND COULD RESULT IN SERIOUS INJURY.
SAVE THESE INSTRUCTIONS
HAZARD
RISK OF BURSTING
3 - ENG
HOW TO PREVENT IT
TURN ENGINE OFF AND ALLOW IT TO COOL BEFORE
ADDING FUEL TO THE TANK. EQUIP AREA OF OPERATION
WITH
A
FIRE
EXTINGUISHER
GASOLINE OR FUEL FIRES.
ADD FUEL OUTDOORS IN A WELL VENTILATED AREA. MAKE
SURE THERE ARE NO SOURCES OF IGNITION, SUCH AS
CIGARETTES NEAR REFUELING LOCATION.
OPERATE COMPRESSOR IN A CLEAN, DRY, WELL VENTILATED
AREA A MINIMUM OF FORTY-EIGHT INCHES FROM ANY BUILD-
ING, OBJECT OR WALL. DO NOT OPERATE UNIT INDOORS
OR IN ANY CONFINED AREA.
STORE
FUEL
IN
A
SECURE
COMPRESSOR.
ALWAYS REMAIN IN ATTENDANCE WITH THE PRODUCT
WHEN IT IS OPERATING.
HOW TO PREVENT IT
DRAIN TANK DAILY OR AFTER EACH USE. IF TANK DEVELOPS
A LEAK, REPLACE IT IMMEDIATELY WITH A NEW TANK OR
REPLACE THE ENTIRE COMPESSOR.
NEVER DRILL INTO, WELD, OR MAKE ANY MODIFICATIONS TO
THE TANK OR ITS ATTACHMENTS.
THE TANK IS DESIGNED TO WITHSTAND SPECIFIC OPERATING
PRESSURES.
NEVER MAKE ADJUSTMENTS OR PARTS
SUBSTITUTIONS TO ALTER THE FACTORY SET OPERATING
PRESSURES.
DO NOT REMOVE THE STIFFENER BAR CONNECTING THE
COMPRESSOR PUMP TO THE ENGINE, EXCEPT TO ADJUST BELT
TENSION, THEN SECURELY TIGHTEN THE STIFFNER BAR NUTS.
THIS BAR CONTROLS OUTFIT VIBRATION.
FOR ESSENTIAL CONTROL OF AIR PRESSURE, YOU MUST
INSTALL A PRESSURE REGULATOR AND PRESSURE GAUGE
TO THE AIR OUTLET OF YOUR COMPRESSOR. FOLLOW THE
EQUIPMENT MANUFACTURERS RECOMMENDATION AND NEVER
EXCEED THE MAXIMUM ALLOWABLE PRESSURE RATING OF
ATTACHMENTS. NEVER USE COMPRESSOR TO INFLATE
SMALL LOW-PRESSURE OBJECTS SUCH AS CHILDREN'S
TOYS, FOOTBALLS, BASKETBALLS. ETC.
CERTIFIED
TO
HANDLE
LOCATION
AWAY
FROM
D20396
Publicidad
Capítulos
Tabla de contenido
