6. Stick the tubes with the footrests in the openings provided for this on the left and the right. Ensure
that the black bracket runs on the tube. Turn the footrests to the front until the pin engages in the
bracket. The rests for the feet point inwards. Fold the footrests down.
7. To adjust the height of the footrests, loosen the wing nuts, remove the screws and set the tubes
to the desired position. Then replace the screws and firmly tighten the wing nuts.
off. To do so, release the brackets on both sides through the lever and pull the tubes with the
footrests from the frame.
The footrests can be
pivoted outwards or taken
10