Operation (continued)
5
Adjusting the TIME control
NOTE: The "TIME" control determines the amount of
time the light will stay on full bright after all motion has
stopped.
□
To increase the time, turn the "TIME" control
clockwise.
□
To decrease the time, turn the "TIME" control
counterclockwise.
C
6
Using manual mode
NOTE: Manual mode overrides the motion sensor (C) and
"TIME" control so the light will operate full bright. This
feature only works at night and only for one night at a time.
The motion sensor (C) will reset to motion sensing mode
after 6 hours or sunrise, whichever comes first. Manual
mode can be toggled on and off using a wall switch.
The following steps must be completed within 3
seconds for manual mode to operate correctly:
□
To turn manual mode on, switch the light OFF-
ON-OFF-ON.
□
To turn manual mode off, switch the light OFF-
ON-OFF-ON.
NOTE: If the power to the light fixture is off for more than
5 seconds, allow the motion sensor to warm up prior to
switching to manual mode.
Turn the switch OFF-ON-OFF-ON
within 3 seconds
9
Please contact 1-866-308-3976 for further assistance.
HOMEDEPOT.COM