To Begin Playback; Before Turning On The Power; Operation - TAD C2000 Manual Del Usuario

TO BEGIN PLAYBACK

Before turning on the power

Make sure that the input terminals and output terminals are securely connected.

Operation

1. Set the power switch to ON.
2. Set the unit's VOLUME dial to its minimum setting.
3. Set the power amplifier's power switch to ON.
Adjust the unit's VOLUME dial to produce the desired level of sound.
4. When finished playing, set the unit's VOLUME dial to its minimum setting and turn OFF (Standby) the power switches to
the power amplifier and this unit.
18