eKuore EK3011 Manual De Usuario página 25

Settings
From the device
Hold the FN button for system displays Settings interface. You can
set a total of seven parameters.
To browse through the different parameters, press the "FN"
button.
Press the "UP" and "DOWN" button to choose the values for each
parameter.
1. SpO upper limit* Default value is 99%.
2
2. SpO lower limit* Default value is 85%.
2
3. Pulse rate upper limit* Default value is 120bpm.
4. Pulse rate lower limit* Default value is 50bpm.
5. Alert volume
6. Automatic screen out ON/OFF. The screen turns off
automatically after 30s of inactivity.
7. Bluetooth
ON/OFF.
*When the measured value exceeds the threshold value, the system will
remind, the buzzer will be on and the numerical value will flicker.
Parameter 2.
SpO2 Lower limit
From the app
You can configure the device from the operation and the
hospitalization screen. Press the button on the upper right corner
to open the configuration options:
Sound ON/OFF
Config alarms SpO2%, tachycardia, bradycardia
Screen ON/OFF
Pause the alerts
Press the "FN" button for a short time to pause the alerts of the
pulse oximeter. The sound will stop but the screen flicker will
remain. To set the alert again, just press the "FN" button.
25
ENGLISH
Value to set