HoMedics MCS-1220H Manual De Instrucciones E Información Sobre La Garantia página 5

POWER BUTTON
To turn on the massage functions, first press the
power button. The massage chaise will power on.
Next, you can choose the full, upper, or lower back
massage zone with optional neck massage.
NECK MASSAGE
To turn on neck massage mechanism, press the
"NECK MASSAGE" button.
NECK MASSAGE HEIGHT
You may adjust the neck massage shiatsu nodes
by holding down either "HEIGHT" button until the
desired position is reached. The up arrow will move
the mechanism upward, and the down arrow will
move it downward. Once you release the button, the
mechanism will stop in that place.
BACK SPOT MASSAGE
While the unit is in kneading massage, press one
of the "SPOT" button arrows to stop and focus
the shiatsu action in one place. Once the "SPOT"
function is activated, press the up arrow to move the
massage mechanism up, or press the down arrow to
move it downward.
SPEED
While the unit is in kneading massage, press the
"H/L" button to adjust the speed that the massage
nodes will travel. The default speed is high. Pressing
the "H/L" button once will decrease the speed to low.
8
DEMO BUTTON
For a brief demonstration of the features of the massage
chaise, press the "DEMO" button. The unit will briefly
go through each function. Once completed, the unit
automatically turns off. The LED light will blink to
indicate active function.
NECK MASSAGE WITH SOOTHING HEAT
To turn on soothing heat in the neck massage nodes,
press the "HEAT" button while the neck massage is in
use. To turn off heat, press the button again.
BACK MASSAGE ZONES
You can select full, upper, or lower back massage.
To select a zone, press the button, and the LED will
illuminate. To deselect, press the button again or select a
different zone.
BACK MASSAGE WITH SOOTHING HEAT
To turn on soothing heat in the back massage nodes,
press the "HEAT" button while the back massage is in
use. To turn off heat, press the button again.
Note: For your safety, heat can only be turned on while a
massage program is running.
9