Operation And Use - Beem Multi-FiXX 1300 Manual De Instrucciones

14 EN
13 Chopping attachment
14 Rasping attachment, coarse
15 Stirring attachment
16 Collecting bowl/grater attachment
17 Blade unit
18 Blender jug
19 Blender lid
20 Blender lid lock
21 Spindle attachment
22 User manual (not illustrated)
Safety switches
The appliance is equipped with a safety
switch and can only be operated if the cor-
responding attachment has been correctly
fitted and locked onto the motor unit.
WARNING
Before using each time, check the
function of the safety switch. Switch on the
appliance with attached jug for this pur-
pose. If the motor turns, the safety switch
is defective and the appliance may not be
used.
Rotary switch
Level Function
Intermittent operation.
Run the appliance intermittently
PULSE
at maximum power for short
intervals.
OFF Appliance switched off.
Continuous operation:
ON MIN
low speed level
Continuous operation:
ON MAX
high speed level
Intermittent operation:
ICE high speed level with alternate
pausing
Possibilities for use
Chopper blade (6): Chopping meat, Tatar,
fresh herbs, nuts, vegetables,
Paddle mixer (9): Making light batter, blend-
ing sauces, yoghurts, quark,
Stirring attachment (15): Whipping egg
whites, cream,
BEEM - Elements of Lifestyle
Chopping attachment (13): Chopping veg-
etables such as carrots and cucumbers into
slices for salads, potato slices for gratin or
fried potatoes, cabbage and pepper strips for
coleslaw,
Rasping attachment (12, 14): Rasping cu-
cumbers for zaziki, potatoes for potato pan-
cakes, soft cheese for soufflés and pizza,
Crown attachment (10): Grating nuts, rolls for
breadcrumbs, hard cheese (e.g., Parmesan),
Blender (17-20): Making milk drinks and
shakes,
Collecting bowl/grater attachment (16):
Squeezing citrus fruits (e.g., oranges, lem-
ons, grapefruits),
Spice sprinkler/grinder container (7): Grind-
ing coffee beans, nuts, spices, dried herbs;
storing spices for sprinkling.

Operation and use

Switching the appliance on/off
The appliance is turned on and off via the
rotary knob (5) as described in the section
Rotary switch (page 14).
Using the mixer
General instructions
Make sure that the blender jug (18) is
seated properly, otherwise the appliance can-
not be operated (safety switch).
Pour liquids into the mixer first and then
the solids.
Do not put solid parts (metal, wood,
bones) into the blender jug.
Cut through larger parts so that they can
be more easily seized by the blade.
Pay attention to the maximum filling quan-
tity of 1500 ml in the blender jug
Mounting the blade unit onto the jug
1. First put the sealing ring onto the blade
unit (17) without twisting. It must fit smoothly
all round.
2. Place the blade unit from beneath into the
mixing jug (18).
3. Turn underneath the blade unit (17) clock-
wise onto the blender jug (18).