Steam Ironing - Hkoenig V26 Manual De Utilización

If the safety eut-out intervenes
a qualified electrician.
Never direct the steam jet in the direction of
Do not use the iron on very wet
Do not place the iron on the stand when the plate is hot.
Do not overfill the boiler and do not add stain-removers of simllar products to water.
Remove the plug from the mains socket when the appliance is not in use. Do not leave the
appliance switched on unnecessarily.
Never unscrew the safety valve when the appliance is connected to the power supply network.
Use a funnel to fill the boiler without causing the water to
The boiler must be placed on a fiat surface that is particularly resistant to high temperatures.
Check the manufacturer's label on the garmen,t and interpret the symbol on label as
Steam ironing allowed
For dry
Steam ironing allowed
For dry
Dry ironing
Check the fabric's resistance to steam ironing or dry iron with
temperature adjustment knob (4) set
Do not iron
Steam ironing or treatment not allowed

STEAM IRONING

The appliance uses ordinary tap water.
If the water is very hard (hardness higher than27 degrees French).we suggest using distilled or
demineralized water.
When using the iron for the first lime
Before using the appliance, taken down the water tank (14) and fill
waterline.
When you want to take back the water tank(14),firstly put the water
water tank softly, after hear
Connecting the appliance and power cord.
Press the switch button
il means the boiler and iron start
Feed-water from electromagnetism water pump coming down the boiler when the boiler (13)
heating enough.
Choosing the temperature by temperature knob
which can be chose (Fig.3).
Around 2 minutes, heating indicator (2) will die out, il means the appliance can be using the
steam.
Around 3 minutes, steam available light (8) will die
steam.
Obtain steam after pressing the steam button (3).
Release the button ( 3)
This appliance is also able to generate steam in a vertical position and can therefore be used to
refresh fabrics easily with a jet of steam.
When you ending the
button (3) to release the residual steam in the boiler
, the iron will no longer
persans,
fabrics.
INSTRUCTIONS FOR USE
ironing, set temperature adjustment knob
ironing, set temperature adjustment knob (4) on
, iron a plain cloth first.
"click", it means the water tank in the
(7), power indicator light (6) and steam available indicator light (8)
running.
and the steam flow stops.
ironing, press the switch button
function. To restore normal operation. Contac
as this may be extremely dangerous.
overflow.
( 4) on ...
...
on...
it, not exceeding MAX
tank
place.
(4), the steam device indicate ironing area
out, it means the appliance can be using the
(7), eut down the power,
(13).
follows:
base and then push the
bright,
press the steam