Klarstein Hot Spot Crystal Flow Manual Del Usuario página 33

Week day mode
1-7 P1
1-5
P2
6-7
1-5
P3
6-7
1-7 P4
1-7 P5
UP mode is week timer setting of comfort / anti-frost set by end-user.
Once UP mode setting is activated, figure d1 (Monday) and
Example 1 - set one or three (at most) time-range at comfortable level, then follow steps
as below,
Touch ∧ or ∨. The LED displays 1 (1st working-hour) &
Touch ∧ or ∨ to select the start time of 1st working-hour among 0-23. Once selected,
to confirm it. Touch ∧ to set end time. Then touch
touch
Note: The end of time must be at least 1 hour more than start time.
The LED turns to display 2 (2nd working-hour). Repeat the same steps of 1st working
hour to set 2 more time-range at most upon your need.
After one day setting is finished, figure d2 (Tuesday)' begins flashing, repeat the same
steps above to set working hour of each day among .
directly instead of  or , to leave that day at anti-frost function.
Example 2 - Touch
Anti-frost Comfort
00:00-
24:00
00:00- 06:30-
06:30 08:30
00:00- 07:30-
07:30 10:00
00:00- 06:00-
06:00 17:00
00:00-
24:00
00:00- 06:00-
06:00 22:00
00:00-
24:00
Working mode
Anti-frost Comfort
08:30- 17:00-
17:00 22:30
10:00- 12:00-
12:00 14:00
17:00-
24:00
22:00-
24:00
begin flashing.
flashes.
to confirm 1st setting.
Anti-frost Comfort
22:30-
24:00
14:00- 17:00-
17:00 22:30
EN
Anti-frost
22:30-
24:00
33