Vetus Uniflex 12 Instrucciones De Instalación página 4

Acoplamiento flexible del árbol porta-hélice
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Mounting
In connection with the axial movement of the propeller shaft a
minimum free space between outer bearing and propeller hub
is required.
Propeller-thrust
N.B. When sailing in forward direction the rubber part must be
compressed.
Using the Uniflex in combination with a V-drive type gearbox is
not allowed!
Over-size (larger) propeller shaft diameter
Reduce the propeller shaft diameter for the taper length (dimen-
sion 'A') to the given dimension 'd' of the coupling, see 'Overall
dimensions'. Radius 'r' minimal 2 mm (0.08").
4
3.0203
Misalignment
The maximum allowable
misalignment of the pro-
peller shaft is 2˚.
General assembly
To achieve a reliably operating coupling all the bolts and nuts
must be tightened with the torques given. Use a torque wrench;
tightening it 'in the blind' will not lead to satisfying results.
Grease the outside of the taper and the bolts.
Flexible propeller shaft coupling UNIFLEX

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Uniflex 16

Tabla de contenido