Technical Data - Vetus Uniflex 12 Instrucciones De Instalación

To prevent slipping between the clamping-joint and the pro-
peller shaft, they must be free of grease and dirt (*).
Tightening torque:
Uniflex 12, M8x25: 25 Nm (2,5 kg.m, 18 lbs.ft)
Uniflex 16, M12x35: 90 Nm (9,0 kg.m, 52 lbs.ft)

Technical data

Uniflex
Weight
Max. torque to DIN6270B
Max. torque to DIN6270A
Max. power to DIN6270B *
Max. power to DIN6270A *
Mass moment of inertia
Dyn. torsional stiffness
Axial pull stiffness
Axial push stiffness
Max. rpm at
. 2 . π . n
* Max. Power P = M
max max
** Maximum angular displacement for both Uniflex models is 2˚.
Flexible propeller shaft coupling UNIFLEX
The numbers indicate the
sequence in which the bolts
have to be tightened.
If necessary, tighten the bolts
again.
:
: 2,8 kg
: 200 N.m
: 175 N.m
: 2,1 kW/100 min
: 1,8 kW/100 min
J : 399 . 10
GD 2 :
: 900 N.m/rad
: 1,7 kN/mm
: 2,8 kN/mm
2˚ ** : 1500 min
0˚ : 4500 min
(M is the max. torque and n the RPM)
max
Take care that the rub-
ber parts are not affect-
ed by solvents.
Disassembling
12
6.2 lbs
144.6 lbs.ft
126.5 lbs.ft
-1 2.8 hp/100 RPM
2.5 hp/100 RPM
-1
-5 kg.m 2
0,016 kgf.m 2
8.63 ˚/100 lbs.ft
0.0105 "/100 lbs
0.0064 "/100 lbs
-1 1500 RPM
-1 4500 RPM
ENGLISH
16
6,9 kg 15.2 lbs
400 N.m 289.3 lbs.ft
350 N.m 253.1 lbs.ft
4,2 kW/100 min -1 5.6 hp/100 RPM
3,6 kW/100 min -1 5 hp/100 RPM
1723 . 10 -5 kg.m 2
0,069 kgf.m 2
1900 N.m/rad 4.09˚/100 lbs.ft
1,9 kN/mm 0.0094 "/100 lbs
5,3 kN/mm 0.0034 "/100 lbs
1500 min -1 1500 RPM
3500 min -1 3500 RPM
5
3.0203