Current Measurement - Steren MUL-282 Manual Del Usuario

Current measurement

Never try to measure current when the voltage between the open circuit and the ground
is higher than 600V.
Never place the test cables in parallel with a circuit or component when they are
connected to the terminals.
1. Remove the power supply and
discharge the capacitors of the
circuit.
2. Adjust the knob to current mea-
suring range: µA / mA / A.
3. Press the
SEL
the current type:
DC
AC
4. Insert the black connector into
the COM terminal. To make a
measuring less than 200 mA insert
the red connector into
nal; to measure between 200 mA
and 10 A insert the red connector
into A terminal.
button to choose
termi-
LINE
NCV
V
V
OFF
A
COM
600V
CAT III
MAX
10A
200mA
FUSED FUSED
A
mA
A
ºC/ºF
AmA
V
MAX
35