Adjusting The Temperature - ROMMER COMBI CM-335 A+ Manual Instrucciones

START
Testing
1. Clean the parts of the refrigerator with lukewarm water containing a littleneutral
detergent and with clear water, and wipe them dry.
E
Notes:
lectric parts of the refrigerator can only be wiped by dry cloth.
2.Press the button to function 5mode. The compressorbegin to work.
3.Open the door 30 minutes later, if the temperature in the refrigerator decreased
obviously, it shows that the refrigerator system works well. When the refrigerator operates
for a period of time, the temperature controller will automatically set the temperature within
limits it opens.

Adjusting the temperature

The temperature of the refrigerator is controlled by the control panel mounted in the fridge
compartment.
1. Under the normal operating condition (in spring and autumn), it is recommended to set
at Mode 5-8.
2. In summer when the ambient temperature is high, it is recommended to set at Mode
2-4, so as to guarantee the fridge and freezer temperatures by extending the
refrigerator running time; and in winter when the ambient temperature is low, it is
recommended to set at Mode 2-4 to avoid frequent start/stop of the refrigerator.
3. Fast Cool: When this function is enabled, the fridge temperature and the freezer
temperature can be reduced rapidly at the same time, so that foods can be kept in
fresh condition with their nutrition not lost. The maximum running time of the fast-cool
function is 26 hours, after which, the refrigerator will be restored to its previous mode
that is set before the fast-cool function is enabled.
NOTE: If the indicator light '2' or '5' or '8' gets flickering, it indicates that the refrigerator
has broken down. Please contact the after-sales personnel for on-site service as soon as
possible.
17