Call Waiting
- While on a call, press the CALL button for 1 second to switch to an incoming call.
- To switch between 2 active calls, press the CALL button for 1 second.
- To end both calls briefly press the CALL button.
- If both handsets are receiving an incoming call, the headset will default to the primary device.
Auto Reconnect
- The headset and handset will automatically reconnect when the HBS-760 is turned back on
while in range.
- The secondary handset will need to be connected manually. Select LG HBS760 from the list of
devices in the Bluetooth menu and pair.
Out of Range
- If the paired devices are separated by a range of 33 feet (10 meters) or more, the headset and
handset will disconnect and the HBS-760 will vibrate to alert you*.
* To turn off device vibration, slide the VOLUME switch to the + position and hold for 2 seconds.
- If the headset and handset do not automatically reconnect when they are back within the
required range, briefly press the CALL button on the HBS-760 to reconnect manually.
- While in multi-connection and streaming, the inactive paired device will be disconnected when out
of range. The HBS-760 will alert you once with no attempt to reconnect.
Calling
Answering a Call
- When there is an incoming call, the headset will ring and vibrate.
- Briefly slide the VOLUME switch to the - position to stop the vibration*.
* The HBS-760 will not vibrate if the vibration function has been turned off.
- Briefly press the CALL button to answer the incoming call.
Transferring a Call
- You can manually transfer the call to or from the headset by pressing the PLAY/PAUSE/
STOP button twice on the HBS-760 (handset and headset must be paired).
Voice Dialing
- Briefly press the CALL button to activate Voice Command. For best results, record the voice
dialing tag through your headset.
NOTE: If your handset does not support voice dialing, this action may activate Last Number
Redial.
How to Use
7