Blumfeldt Lamera Manual Del Usuario página 9

MOUNTING WITH SCREWS
Place the anti-slip washer on the
black hinge, then insert the screw
through the slot of the hinge. Place
the U-shaped metal bracket on the
screw and attach the nut. Place
everything into the recess of the
toilet bowl. Hold the hinge firmly and
tighten the screw so that it can still
be moved tightly.
Remove the toilet seat again. Tighten
the screws and place the stainless
steel cover on the hinges.
If you press the button 1x, you can
remove the toilet seat with both
hands afterwards.
Place the toilet seat on the hinge
base to fit the seat to the toilet bowl.
Adjust the position of the seat until it
fits properly and tighten the screw.
Place the toilet seat back on the
hinges.
Required for installation:
Screwdriver
Toilet seat (1x)
Metal brackets (2x)
Hinges (2x)
Anti-slip washers (2x)
Screws (2x)
Hinge covers (2x)
Nuts (2x)
EN
9