Descargar Imprimir esta página

Indel B TB32 Instrucciones Para El Uso página 10

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

ENGLISH
LOCATION
- Place the refrigerator on a dry, sheltered, flat surface and away from any edges. The refrigerator must
not be used unsheltered, in the open air or exposed to splashing or rain.
- Your refrigerator requires good ventilation, especially around the back of the refrigerator, allow a gap of
at least 15 cm around the sides, back and top. Never use your refrigerator in the boot of a car or against
a seat or wall.
- Avoid placing your refrigerator near a heat source eg. a cooker, radiator or in direct sunlight. When us-
ing your refrigerator at a picnic or camping site, be sure that it I s kept sheltered and in the shade at all
times. This helps the refrigerator to work more efficiently and keep the contents cool.
- Do not drape the refrigerator with any covering or block t he heat exchange grille.
WARNING
- It is hazardous for anyone other than authorised service personnel to carry out servicing or repairs which
involve the removal of covers.
- To avoid the risk of an electric shock do not remove the cover of the mini cooler.
USING THE REFRIGERATOR IN A VEHICLE
VERSION WITH ELECTRONIC THERMOSTAT
- Connect the feeding cable to a direct current 12 or 24 V DC power source.
- Make sure the polarity is right.
- The supply line is protected by a 15 A fuse located on the box.
- If connected to an existing cigarette plug, carefully check up that power supply is sufficient
- If the supplied power cable is not used, see the table containing the information related to the cable
section:
CABLE AREA
2,5 (AWG 14)
10
2
mm
(AWG)
4 (AWG 10)
6 (AWG 8)
VERSION WITH MECHANICAL THERMOSTAT
MAX CABLE LENGHT METRES (ft)
12V
5 (15)
8 (25)
12 (35)
TB32
24V
8 (25)
12 (35)
12 (35)
TB32_05-09-2017

Publicidad

loading