Kohler K-14297 Manual Del Usuario página 3

Clamp
Drain Tailpiece
2. Install the Lavatory
Apply sealant tape to the threads of the drain tailpiece.
Thread the drain tailpiece into the underside of the lavatory.
NOTE: Do not use adhesives or adhesive sealants with this product.
Only use silicone sealant.
Apply a continuous bead of silicone sealant to the top surface of
the lavatory rim where it will contact the countertop.
Position the lavatory and gently press into place.
Loosely secure the lavatory to the countertop using the clamps
provided with the lavatory and the fasteners provided by the
countertop manufacturer.
Verify the lavatory position within the cutout before tightening
the clamps. Draw the lavatory rim up against the countertop until
it is snug. Do not overtighten.
Immediately wipe away any excess sealant and fill any voids as
needed. Allow the sealant to set for 30 minutes before proceeding.
Connect and tighten the trap to the drain. Complete the water
supply connections to the faucet according to the instructions
packed with the faucet.
Run water into the lavatory and check for leaks.
Kohler Co.
Apply silicone sealant.
Fastener (provided by
countertop manufacturer)
3 1114039-2-A