Taurus GALEXIA PREMIUM Modo De Empleo página 11

Only use the appliance with the specific electric con-
nector provided.
- Remove the electrical connector before starting any
cleaning operation.
- Never submerge the connector in water or any other
liquid or place it under running water.
- Dry the product immediately after any cleaning
operation and ensure that the base of the product's
connector is perfectly dry.
- If the connection is damaged it must be replaced.
Take the appliance to an authorised Technical Assis-
tance Service. Do not try to dismantle or repair without
assistance, as this may be dangerous.
- Ensure that the voltage indicated on the nameplate
matches the mains voltage before plugging in the
appliance.
- Connect the appliance to a base with an earth
socket withstanding a minimum of 10 amperes.
- Do not allow the connection cable to come into
contact with the appliance's hot surfaces.
- Check the condition of the electrical connection
cable. Damaged or tangled cables increase the risk
of electric shock.
- Do not touch the plug with wet hands.
- Do not use the appliance if the cable or plug is
damaged.
Use and care:
- Fully unroll the appliance's power cable before
each use.
- Disconnect the appliance from the mains when not
in use and before undertaking any cleaning task.
- This appliance is for household use only, not
professional or industrial use.
- This appliance should be stored out of reach of
children and/or the disabled.
- Do not put the appliance away if it is still hot.
- Turn the thermostat control to the minimum (MIN)
setting. This does not mean that the iron is switched
off permanently.
Manual Galexia Premium.indb 11
Service:
- Any misuse or failure to follow the instructions for
use renders the guarantee and the manufacturer's
liability null and void.
Instructions for use
Before use:
- Before using the product for the first time, clean the
non-slip plate with a soft cloth dampened with water.
Connect the plug to your electrical socket and set the
temperature selector to the desired position.
Set the thermostat to the desired temperature. The
pilot light will come on, indicating that the appliance
is in the process of heating up.
Wait until the pilot has gone out, indicating that the
appliance has reached the ideal temperature.
Work with the food you want to process.
Carefully place the food to be roasted on the grill.
When the food is cooked to your taste, remove
it from the appliance using a wooden spatula or
similar utensil.
Once you have finished using the appliance:
- Select the minimum position (MIN) using the
thermostat control.
27/06/14 11:14