Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
•
You can conveniently navigate through the CD / MP3-CD in the conventional way, using
•
Stop the CD (
) and press and hold
ture). Playing MP3-CDs with folders, this would lead to skipping to the next folder.
•
If no CD is inserted or the inserted CD is not readable (due to wrong file format, dirt or damage to the CD), NO
DISC will be shown on the display.
Programming a playlist
Programming a playlist is possible when the playback is stopped. Up to 20 tracks for CD disc and 99 tracks for MP3
disc can be stored in the memory in any order.
•
In stop mode, press PROG/P-MODE to enter program setting. The PROG logo will flash on the display and show
P01.
•
Press
/+10 to select the first desired track to be programmed (for example: track 2).
•
Press PROG/P-MODE to confirm. The display would flash PROG and show P02.
•
Repeat these steps to store other desired tracks until all tracks are programmed.
•
Press
to start playback from the first programmed track.
•
To clear the program, you may press
Repeat and random modes
During Playback, press PROG/P-MODE repeatedly for
a)
-
repeating the current track.
b)
ALL -
repeating the whole volume.
c)
DIR -
repeating the current directory (in MP3 mode only).
d) RAN -
playing the tracks on the volume in a randomized sequence.
e) -
deactivating the repeat and random modes.
•
Switch to the USB or SD mode using FUNC. Connect any suitable USB volume (USB stick, MP3 player, USB hard
drive or similar) or a SD card respectively.
•
You can conveniently navigate through your music library in the conventional way, using
analoguos to the way you would use a CD volume. According to the MP3-CD usage, holding
ping folders; the functions repeat and random are the same as well.
Please note: Do not use any USB extension cables for connecting the USB bar as this may cause harmful interference.
•
Switch to the BT mode using FUNC. The display shows bT and the pairing LED (7) flashes.
•
Activate BT on your smart device and connect with „SOUNDBLASTER".
•
If you are asked for a password, please type in „0000".
•
The successful connection will be indicated by the blue LED (7) and bT on the display. You now can play back sound
from your mobile device through the SOUNDBLASTER M.
•
You can conveniently navigate through your music library in the conventional way, using
Please note: BT works best within a range of 10m.
•
Connect any external music or media player (CD/MP3 player, smartphone, laptop, computer or similar) to the Aux
input (8) of the SOUNDBLASTER M via a 3.5mm audio cable.
•
Use the external player as you are used to. Do, however, not forget to turn the volume up.
/+10 to skip 10 tracks at once (useful for MP3-CDs without any folder struc-
when the disc stopped and open the CD lid.
USB / SD Card
BT
AUX
,
and
/
.
,
and
/
/
means skip-
,
and
/
14
Publicidad
Tabla de contenido
