Powermat Pobercube Manual Del Usuario página 15

Problem
The indication light
is not lit
The indication light
is flashing
No magnetic lock
Solution
If the indication light on the front of
the mat fails to glow at all, a proper
connection between the Powermat Mat
and your device has not been made.
Re-align the center of the Powermat
Receiver with the Power Access Point on
your Powermat Mat until the light glows.
If the light flashes on and off instead of
emitting a steady glow, the connection is
incomplete. Keep adjusting the position
of your Powermat Receiver until you
see a steady light. When the light emits
a steady glow, proper positioning has
been achieved and charging will begin.
Magnetic lock is achieved when the
device and Power Access Point are
properly aligned. Re-align the Powermat
Receiver with the Power Access Point
on your Powermat Mat until a physical
lock is achieved.
14