Descargar Imprimir esta página

MacNeil WeatherYech Easy-On Instrucciones De Instalación

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Important Safety Information
• CAUTION - Before driving, ensure that the hood shield is properly secured to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
Contents
NOTE: Actual product may vary from illustration.
Tools Required
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
Installation Steps
1
Installation Instructions
Hood shield
Car Wash Supplies
NOTE: Actual application may vary slightly from illustrations.
Open hood.
Alcohol
Prep
Pad
Manufactured for Auto Ventshade
Lawrenceville, GA
Alcohol Pad x2
Clean Towel
Thoroughly clean underside of the leading edge of
Alcohol
hood with the enclosed alcohol pads and allow to dry.
Prep
Pad
Manufactured for Auto Ventshade
Lawrenceville, GA
2
Page 1 of 2
I - Sheet Number WTBF102 Rev.A
Bump On x2
Alcohol
Prep
Pad
Manufactured for Auto Ventshade
Lawrenceville, GA

Publicidad

loading

Resumen de contenidos para MacNeil WeatherYech Easy-On

  • Página 1 Installation Instructions I - Sheet Number WTBF102 Rev.A Important Safety Information • CAUTION - Before driving, ensure that the hood shield is properly secured to vehicle. • Do not use automatic “brush-style” car washes. • Do not use cleaning solvents of any kind. •...
  • Página 2: Installation Steps

    Close hood, Install (2) bump ons at pre-cleaned areas of hood surface. Care and Cleaning • Wash only with mild soap & dry with a clean cloth. Page 2 of 2 © 2012 by MacNeil IP LLC...
  • Página 3: Outils Nécessaires

    Instructions d’installation I- Feuille numéro WTBF102 Rév.A Informations importantes concernant la sécurité • ATTENTION – Avant de conduire, s’assurer que le pare-insectes est solidement assujettie sur le véhicule. • Ne pas utiliser les stations de lavage de voitures à brosses. •...
  • Página 4: Étapes D'iNstallation

    Fermez le capot, posez les gommes (2) sur les endroits marqués de la surface du capot préalablement nettoyés. Entretien et nettoyage • Laver exclusivement avec de l’eau savonneuse et sécher avec un chiffon propre. Page 2 de 2 © 2012 by MacNeil IP LLC...
  • Página 5: Herramientas Necesarias

    Instrucciones de instalación Hoja informativa N.° WTBF102 Rev. A Información importante de seguridad • PRECAUCIÓN - Antes de conducir, asegúrese de que la visera deflectora esté correctamente anclada al vehículo. • No utilice servicios automáticos de limpieza de vehículos que utilizan cepillos. •...
  • Página 6: Pasos De Instalación

    áreas que hayan sido previamente limpiadas de la superficie del capó. Cuidado y limpieza • Limpie solamente con agua jabonosa tibia y seque con un paño limpio. Página 2 de 2 © 2012 by MacNeil IP LLC...